HashiCorp Developer AI Private beta now available Sign up today
Consul
Archive

Upgrade multiple federated Consul datacenters

  • 14min
  • |
  • Consul

One of the fundamental operations to be performed in any production environment is to upgrade to a new version without experiencing downtime and to minimize any risk factors that could lead to future outages.

In this tutorial, you will learn how to perform the upgrade of a multi-datacenter federated Consul environment.

To perform the upgrade we recommend you perform a rolling upgrade/restart of the Consul agents on all the servers nodes in the primary datacenter, followed by a similar rolling upgrade/restart of all the client agents. After the upgrade of the primary datacenter is completed successfully, you will perform the same process on the secondary datacenter. This approach ensures you maintain availability for the datacenters and federation during the whole process.

Prerequisites

Consul versions

In this tutorial we will show the use case of upgrading a federated Consul environment running on 1.7.11 to Consul 1.9.2.

Note

As a general best practice, when upgrading, you should always consider upgrading to the lastest available version to take advantage of all new features and fixes.

To complete this tutorial, you will need two wide area network (WAN) joined Consul datacenters with access control list (ACL) replication enabled. If you are starting from scratch, follow these tutorials to set up your datacenters, or use them to check that you have the proper configuration in place:

You will also need to enable ACL replication, which you can do by following the steps in the ACL Replication for Multiple Datacenters tutorial.

Lastly, if you are using Consul service mesh, you should set enable_central_service_config = true on your Consul clients which will allow you to centrally configure the sidecar and mesh gateway proxies.

Prepare for upgrade

Check version compatibility

Operating a Consul datacenter that is multiple major versions behind the current major version can increase the risk incurred during upgrades. We encourage our users to remain no more than two major versions behind (i.e., if 1.9.x is the current release, do not use versions older than 1.7.x).

If you are running a Consul version older that 1.7.x please check our documentation for:

Take a snapshot

The procedure in the tutorial should not cause any data loss in Consul state. Still, as a general best practice, it is recommended to take a snapshot of your environment every time you perform a potentially disruptive operation such as an upgrade.

You can follow the Backup Consul Data and State tutorial to learn how to perform a snapshot on an existing Consul datacenter.

Increase log verbosity on agents

Temporarily modify your Consul server configuration so that their log_level is set to debug. Use the following command on your servers to reload the configuration.

$ consul reload

Configuration reload triggered

This change will give you more information to work with in the event something goes wrong.

Install new Consul version on agents

Follow instructions listed in Install Consul to install the last version of Consul on your agents.

Server rolling upgrade

In order to minimize unavailability the suggested approach it to perform the upgrade process one server at a time, starting with the followers and upgrading the Raft leader last.

To identify the Raft leader in your datacenter, use the consul operator command.

$ consul operator raft list-peers

Node      ID                                    Address          State     Voter  RaftProtocol
server-1  9fa70624-f6b5-5a1f-8777-600fce95de01  172.19.0.3:8300  leader    true   3
server-2  1f90f8a4-b25f-200e-375f-dc5c4225355c  172.19.0.4:8300  follower  true   3
server-3  6034d960-5736-f3c1-f6dd-0338d86fd6ef  172.19.0.5:8300  follower  true   3

In the example output above the leader is server-1 so you can proceed with upgrading server-2 and server-3 first and then upgrade server-1 last.

Note

The upgrade on the servers will be completed only after you complete the upgrade steps on ALL servers. The tutorial will show example outputs to give you guidance on what should be the expected output in your instance.

Leave datacenter

Login to the server agent and issue the consul leave command.

$ consul leave

Graceful leave complete

Wait until the command returns.

After the server leaves the datacenter you should observe the following output in your datacenter.

$ consul members

Node      Address          Status  Type    Build   Protocol  DC       Segment
server-1  172.19.0.3:8301  alive   server  1.7.11  2         primary  <all>
server-2  172.19.0.4:8301  left    server  1.7.11  2         primary  <all>
server-3  172.19.0.5:8301  alive   server  1.7.11  2         primary  <all>

Confirm from the output the server is now shown as left in the command output.

Start new version

Before starting Consul, check the version for the binary in your path with:

$ consul version

Consul v1.9.2
Revision 6530cf370
Protocol 2 spoken by default, understands 2 to 3 (agent will automatically use protocol >2 when speaking to compatible agents)

You can now start Consul again making sure you are now using the new binary version.

If the version isn't the new version, redo the steps in Install Consul.

After starting Consul again you can confirm it joined the datacenter again.

$ consul members

Node      Address          Status  Type    Build   Protocol  DC       Segment
server-1  172.19.0.3:8301  alive   server  1.7.11  2         primary  <all>
server-2  172.19.0.4:8301  alive   server  1.9.2   2         primary  <all>
server-3  172.19.0.5:8301  alive   server  1.7.11  2         primary  <all>

As you can confirm, now all the three servers are marked as alive and now server-2 shows 1.9.2 as its version.

Update ACL token for agent

In case your ACL configuration did not include enable_token_persistence = true and you did not set the server tokens in the configuration files, you will need to set the agent and default token for the agent again before it could join the datacenter. See Add the token to the agent for more information.

Leader restart

It is important to perform the upgrade one server at a time to ensure there are enough live servers to maintain quorum. Once the servers with the new version join the raft cluster, it is possible a new leader election will be triggered without the leading server leaving the datacenter or being restarted. If the process is followed, Consul will gracefully react to the leave and restart of the server agents and will remain available during the whole upgrade process.

Note

In this scenario each datacenter runs a total of 3 servers, meaning that you can maintain quorum as long as 2 servers are still part of the Raft cluster.

Client rolling upgrade

After the servers are correctly restarted and re-joined the datacenter you can perform the same steps on every client agent to upgrade Consul.

  1. Install Consul's new version on the client
  2. Stop the client agent using consul leave
  3. Start Consul using the new binary
  4. Verify the client is correcly shown in consul members

Service downtime considerations

When upgrading the client agents, after you issue consul leave on the agent, the service provided by the agent will be marked as unhealthy and will not be discoverable until the Consul client agent is restarted.

To avoid downtime for your services you should consider, as a general best practice, to run multiple instance of the same service each with its own Consul client agent.

In this way you can upgrade the two Consul agents in two separate moments and Consul will automatically redirect traffic to the other service instances during the Consul agent upgrade.

Envoy version compatibility

If you are using the Consul service mesh functionality, when upgrading Consul on the client nodes you will also have to make sure the Envoy version you have on the node is compatible with the new version of Consul.

You can check out the Envoy version supported by your new Consul version on the Envoy Integration documentation page.

If you are running Consul 1.8.4 or later you can also use the /v1/agent/self API endpoint to check the compatible Envoy version for your running agent.

In this scenario we are upgradring from Consul 1.7.11 which supports Envoy up to version 1.13.6 to Consul 1.9.2 that supports Envoy from version 1.13.6.

This means that, the two version share a compatible Envoy version and that if you are running Envoy 1.13.6 on your agents you might not need to upgrade Envoy right away.

Still we recommend to upgrade Envoy to the latest supported version to leverage the Consul compatibility with the new Envoy functionalities and improvements.

Refer to Envoy documentation to learn how to install Envoy on your system.

Update Secondary Datacenter

Once the upgrade is completed on the primary datacenter, you can follow the same steps to perform the upgrade on the second datacenter.

Verify federation

After the upgrade process is complete you can confirm federation is still working using the consul members command.

$ consul members -wan

Node                Address          Status  Type    Build  Protocol  DC         Segment
server-1.secondary  172.19.0.7:8302  alive   server  1.9.2  2         secondary  <all>
server-2.secondary  172.19.0.8:8302  alive   server  1.9.2  2         secondary  <all>
server-3.secondary  172.19.0.9:8302  alive   server  1.9.2  2         secondary  <all>
server-1.primary    172.19.0.3:8302  alive   server  1.9.2  2         primary    <all>
server-2.primary    172.19.0.4:8302  alive   server  1.9.2  2         primary    <all>
server-3.primary    172.19.0.5:8302  alive   server  1.9.2  2         primary    <all>

Also you can check replication is still active in the secondary datacenter using the /v1/acl/replication REST endpoint on any Consul agent on the secondary datacenter. The command in the example uses one of the secondary datacenter servers.

curl -s -H "X-Consul-Token: $CONSUL_HTTP_TOKEN" https://server-1.secondary/v1/acl/replication?pretty

{
    "Enabled": true,
    "Running": true,
    "SourceDatacenter": "primary",
    "ReplicationType": "tokens",
    "ReplicatedIndex": 834,
    "ReplicatedRoleIndex": 1,
    "ReplicatedTokenIndex": 837,
    "LastSuccess": "2021-01-15T17:16:28Z",
    "LastError": "0001-01-01T00:00:00Z"
}

Note

The primary datacenter (indicated by primary_datacenter in the secondary server configuration) will always show as having replication disabled, so this is normal even if replication is happening.

Next steps

In this tutorial you learned how to perform an upgrade for your federated Consul environment.

Specifically, you:

  • Prepared for the upgrade by checking version compatibility and performing a snapshot
  • Installed the new Consul binary on all nodes
  • Performed a rolling upgrade of the servers on the primary datacenter
  • Performed an upgrade of the clients on the primary datacenter
  • Followed the same process to upgrade the secondary datacenter
  • Verified that connection and federation were still working after the upgrade

The process described in this tutorial can be safely applied to your production datacenter without the risk of downtime. We still recommend you to test any possible disruptive operation such as an upgrade, on a test environment that replicates the existing production environment.

Enterprise users can leverage Automate Upgrades feature of Consul's autopilot.

Previous

Automated upgrades

 Next

CTS and Zscaler